The 6.2-liter Chevrolet engine is a General Motors small-block engine based on the LS/LT platform. Since 1995, this motor has been in production, and it is the one that has been used to replace the Chevy small-block Northstar engine. The primary V8 found in GM’s lineup of cars with rear-wheel drive is a displacement of…
How do you decipher the VIN number on a Chevy? The vehicle identification number (VIN) for the Chevrolet truck may be found on a tag that is connected to the dash panel on the driver’s side, under the windshield molding The first character will provide information about the location of the truck’s manufacturing facility A…
The side with cylinder 1 is where bank 1 is located. Cylinder 2 is located on the side designated as Bank 2. If the engine is mounted transversely in the vehicle, Bank 1 is most often located at the front of the vehicle. Verify the location of bank 1 and bank 2 by consulting either…
Perform a bleed on the ABS System.Put one end of a piece of plastic tubing—any sort of inexpensive tube will do—over the bolt that controls the brake bleeder.An additional end will be inserted into a tiny container that has one or two inches of new brake fluid already inside of it.By using this simple technique,…
Additionally, early 265s had a unique off-set valve cover pattern in comparison to all other small blocks of the first generation. Additionally, the cylinder head bolts on these off-set valve cover heads had just two bolt lengths rather than the standard three lengths seen on all other sb heads. Contents1 How to adjust the valves…